RSS Feed
Knowledgebase

The next steps can save beginner users from making mistakes when working on user drives. 1. Hold that drive with your hand and carefully shake it from side to side, then listen, if there are any moving parts bouncing the HDA inside. Powering on t...
Some drives can have a bad reading ability. It may be caused by contamination of of platters. You can try to clean it. For do this you need: brush for painting and spirit (alcohol). Brush must have 0,7 cm at diameter and be very smooth, without sepa...
Hello. Each time you reinstall the software, it generates new activation request file(file with .arf extention) and requires new activation key file(file with .act extention). Automatical method does that for you, but sometimes manual method is r...
DE Viewer had been released [1] more than half a year but many of our customers still have troubles with using it or doesn't know how to use it. Let me explain how simple it work on typical use-case. 1. Firstly you need to make a snapshot of the ...
Sometimes we need to write ROM image to PCB. There is a way to work with ROM using a new special mode - Boot ROM. At first we need to connect the drive to COM-port. To connect the drive to COM-port we can use MX-SAFE adapter from PC-3000 kit. Connect...
If you are not satisfied with the level of our Technical Support service, please contact Head of Tech Support at support@acelab.ru
Most popular articles 
 
Newest articles